Lead And Zinc Ore SF Flotation Machine
Basic Info
Model No.: SF Flotation Machine
Product Description
Lead And Zinc Ore SF Flotation Machine
SF flotation machine is suitable for the separation of non-ferrous metals and non-metals such as coal translucent stone and talc.
The floatation machine is driven by the motor trigonometric generation to drive the impeller to rotate, resulting in centrifugal action to form negative pressure. On the one hand, sufficient air is mixed with ore pulp on the one hand. On the one hand, the slurry is mixed with the medicine, and the foam is refined at the same time, so that the mineral adheres to the foam and floats to the slurry surface to form a mineralized foam. Adjust the height of the gate and control the liquid level, so that the useful foam is scraped out by the scraper. The series flotation machine adopts a novel forward inclined tank, and the double blade turbine is equipped with a draft tube and a false bottom device. The slurry in the tank carries out the upper and the lower double circulation according to the fixed flow mode, which is favorable for the suspension of coarse mineral, and can self suction air, self suction slurry, and does not need foam pump. This product is produced by the only designated enterprise of the Ministry of mines, and implements the industry standard.
Lead And Zinc Ore SF Flotation Machine is a mineral separator that mainly used for the flotation beneficiation plant, which can be used for various kinds of ores, such as for copper ore benefication plant, lead ore beneficiation plant, graphite ore beneficiation plant, cobalt ore beneficiation plant, nickel ore beneficiation plant, lithium ore beneficiation plant, gold ore beneficiation plant, and so on. the slurry is fed to the SF Flotation Machine after mixing with some additives, and with the help of air, there will be a lot of bubbles, and the mineral will adhear to the bubbles, which will floate to the top of the slurry, then adjust the height of the flashboard, then the scraper on the SF Flotation Machine will take out the useful minerals, and there are some amount which is not processed thoroughly will flow to the next tanks, until it's effectively separated, then it will becomes the tailings and are discharged from the bottom of the air flotation machine.
Working Principle of Lead And Zinc Ore SF Flotation Machine:
The motor drives belt pulleys to make the impeller moving by triangle belt. One is to mix the air and pulp sufficient, the other side is to agitate the pulp with chemical reagents as well as thinning the bubbles. The ore particles stick on the bubbles by the chemical reagents and float to the surface of the pulp and then become the forth and scraped by the scrapper.Structure and Material of High Efficiency Dissolved Air Flotation Machine:
When the flotation machine is working, the inlet ore pipe feed the pulp to the center of the cover and then swi out the pulp by the revolving impeller of the centrifugal force. Meanwhile, there is a negative pressure zone in the space of the impeller and cover so air can be inhaled from the air inlet pipe automatically. The strong agitation of the impeller mixes the pulp and air sufficient and then be made to many small bubbles. The bubbles go up to the forth and be scrapped out to be forth product.
Features of Lead And Zinc Ore SF Flotation Machine:
1. Strong stirring force can ensure the suspension of mineral particles with larger density and particle size, and promote the dispersion of insoluble reagents with high utilization rate.
2. The investment cost is small and the profit is considerable.
3. The equipment is reasonable, economical and durable.
4. It is easy to adjust, the liquid level is stable, the sorting index is good, and it is beneficial to increase the output and adjust the process. volume (m3) loam board Dimensions (L×W×H)(mm) (kw) (r/min) (r/min) (kw) XJK type flotation machine XJK-0.35 0.35 0.18-0.4 1.5 483 25 1.1 700×700×700 460 XJK-0.62 0.62 0.3-0.9 3.0 400 25 1.1 900×820×850 980 XJK-1.1 1.1 0.6-1.6 5.5 330 25 1.1 1100×1100×1000 1390 XJK-2.8 2.8 1.5-3.5 11 280 25 1.1 1750×1600×1100 2430 XJK-5.8 5.8 5-7 22 240 25 1.5 2200×2200×1200 3533 SF type SF-0.37 0.37 0.2-0.4 1.5 386 25 1.1 700×700×750 468 SF-0.7 0.7 0.3-0.9 3 400 25 1.1 900×820×950 990 SF-1.2 1.2 0.6-1.6 5.5 330 25 1.1 1100×1100×1100 1837 SF-2.8 2.8 1.5-3.5 11 268 25 1.1 1750×1600×1150 2538 SF-4 4 2-4 15 220 25 1.5 1850×2050×1200 2838 SF-8 8 4-8 30 191 25 1.5 2200×2900×1400 4129 SF-10 10 5-10 30 191 25 1.5 2850×3900×1700 4486 SF-20 20 5-20 30×2 191 25 1.5 2850×3800×2000 9828
Main Technical Parameters of Lead And Zinc Ore SF Flotation Machine
Category
Specification
Effective
Processing capacity
(m3/min)
Main shaft
weight(kg) (one cell)
Power
Rotate speed
Rotate speed
Power
flotation machine
Contact us if you need more details on SF Flotation Machines. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Zinc Ore Flotation Machine、Lead Ore Flotation Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Beneficiation Equipment > Mineral Separator