PU foam rolling shutter door roll forming machine
Basic Info
Model No.: ZT-002
Product Description
PU foamed roller shutter Forming Machine
PU foamed rolling shutter door Roll Forming Machine is developed based on the traditional rolling shutter door making machine. At the very begining, use the roll forming principle to make the narrow coil to shutter door shape and then use the PU Foam Machine to inject the PU into the shutter door. The PU can make the shutter door more strong against the fire, hot weather and cold wind. Take the following drawing profile for example:
Customer drawing profile of PU foam shutter door:
1. Working flow of PU rolling shutter door:
Decoiler-feeding device-main forming-PU injection ---straighten device-Cutting ---run out table
2.Machine component of this rolling shutter door roll forming machine:
1.Decoiler 1 set
2.Guide Feeding device 1 set
3.main forming machine 1 set
4.PU Foaming machine 1 set
5.Straighten device 1 set
6.flying saw Cutting Machine 1 set
7.finished products table 1 set
8.PLC control system 1 set
Here is the rolling shutter door machine pictures for your reference:
3. Suitable material
Material type: Aluminum coil plate and colorful galvanize steelMaterial thickness: 0.27- 0.4mm.coil width: 187mm
Material yield strength: ≤G200Mpa
4. Main specification
a. Decoiler
Manual un-coiling
Capacity: ≤3 T
b. Main datas of forming machine:
Forming stands: about 28 stands
Roller material: Cr12
Axial diameter: Φ40mm
Main shaft material: 40Cr
Driving part: gearbox
PLC touch screen: Siemens
Inverter: Mitsubishi
Control electrical components: Schneider
PLC control: fix length control ±1mm
The precision of roller: less than ±0.5mm
Main roll forming machine motor: 380V, 50HZ, 11kw (or according to your requirements)
Machine basement material: H beam
5.Foaming machine: 1 set (China top brand)
6.Pneumatic flying Punching Machine: 1 set
Material of cut: Cr12Mov; Quench: HRC58-62
Here is the PU foam machine for your reference:
Product Categories : Roller Shutter Door Forming Machine