Pipe Cutter Machine (CF-SG40/SG60)
Basic Info
Model No.: CF-SG40/SG60
Product Description
- Model NO.: CF-SG40/SG60
- Trademark: ATM, TUBE
- HS Code: 8415
- Standard: GB
- Origin: China
Performance features:
1. The machine is controlled by PLC. And it equips with manual, semi- automatic and full-automatic set, which can be chosen freely.
2. Remote foot pedal has function of start-up and emergent stop, Which has high safety.
3. It is designed with automatic totaling and stop automatic when meet the setting number.
4. The magnifying framework is special designed; It has tighten power and will not cost damage.
5. Sg40 type is designed to tight and jostle at the same time, it has high producing
Efficiency, the process is fixed by time and machine so it has high repetition precision.
6. According to the practical requirements, choose the pulling time to make the movement flat, no impact and safe.
7. There is converse angle mould so when changing moulds, shrinking
Pipes, expanding pipes or processing, it will process and converse angle
Once time, the shape is wonderful.
8. The outside design is refined and concision, and it has the active moving support and orientation equipment for you to choose, it is convenient and safe.
| | Sg40 | Sg60 |
| Max. pipe shrinking diameter (mm) | 40 | 60 |
| Max. pipe shrinking length (mm) | 110 | 120 |
| Pipe shrinking cycle (sec) | 5-6 | 6-7 |
| System rated pressure (MPa) | 12 | 14 |
| Oil pump expel quantity (L/min) | 17 | 19 |
| Oil tank capacity (L) | 240 | 320 |
| Main motor (kw) | 4.0 | 5.5 |
| Width (mm) | 1180 | 1250 |
| Height (mm) | 1360 | 1450 |
| Length (mm) | 1180 | 1380 |
| Weight (mm) | 1360 | 1450 |
Product Categories : Sheet Metal Fabrication
Premium Related Products
Other Products
Hot Products
Enclosure sealing strip gluing machineHigh performance fiber spray machine with gunAutomatic pneumatic foam mouldingFT-G1200 Draught fan front disk flow forming machinehydraulic oval tubeformerBOBO FULL AUTOMATIC BARREL HOOP ROLL FORMING MACHINE0.8-1mm induction cooker Jumper wire bending machineBimetallic extruded finned tube making machineAutomatic copper capillary tube cut off machine with tube end forming processHVAC Standing S&D cleat slip and drive lockformer and rollformer machineTruck bedliner polyurea coating and spraying machinePolyurethane PU foam injection machine for hollow tire foam filling workHAVC spiro round galvanized duct tubeformer machineCondenser pipe machine for frezzer and air conditionerCNC heli coil forming screw stainless steel wire thread insert forming machineSteel clamp clip reinforced PVC / glass silicon / tarpaulin flexible duct machine